Underground mining methods

  A drift mine is driven horizontally into coal that is exposed or accessible in a hillside. In a hydraulic mine, high-pressure water jets break the coal from a steeply inclined, thick coalbed that would be difficult to mine with the usual underground methods. The coal is then transported to the surface by a system of flumes or by pipeline. Although currently not in commercial use in the United States, hydraulic mining is used in western Canada.
  A punch mine is a type of small drift mine used to recover coal from strip-mine highwalls or from small, otherwise uneconomical, coal deposits. A shaft mine is driven vertically to the coal deposit. A slope mine is driven at an angle to reach the coal deposit.
  In a room-and-pillar mining system, the most common method, the mine roof, is supported mainly by coal pillars left at regular intervals. Rooms are places where the coal is mined; pillars are areas of coal left between the rooms. Room-and-pillar mining is done either by 1) conventional mining, which involves a series of operations that require cutting the working face of the coalbed so that it breaks easily when blasted with explosives or high-pressure air, and then loading the broken coal or 2) continuous mining, in which a continuous mining machine extracts and removes coal from the working face in one operation. When a section of a mine has been fully developed, additional coal is extracted by mining the supportive pillars until the roof caves in; the procedure is called room-and-pillar retreat mining.
  In a longwall mining system, long sections of coal, up to about 700 feet, are removed and no pillars are left to support the mined-out areas. The working area is protected by a movable, powered roof support system. The caved area (gob) compacts and, after initial subsidence, supports the overlying strata. Longwall mining is used where the coalbed is thick and generally flat, where surface subsidence is acceptable.
  A shortwall mining system generally refers to the room-and-pillar mining in which the working face is wider than usual but smaller (less than 150 feet) than that in longwall mining.
  Roof support and mine ventilation are paramount in all underground mining operations. Roof bolting is the principal method of supporting the mine roof. In roof bolting, long bolts, 2 to 10 feet long with an expansion shell or with resin grouting are placed in the mine roof. The bolts reinforce the roof by pulling together rock strata to make a strong beam or by fastening weak strata to strong strata. Mine ventilation, accomplished with fans, is essential to supply fresh air and to remove gases and dust from the mine. To reduce the possibility of coal dust explosions, rock dust is sprayed in an underground coal mine. Rock dust is a very fine noncombustible material (pulverized limestone).
  U.S. Dept. of Energy, Energy Information Administration's Energy Glossary

Energy terms . 2014.

Look at other dictionaries:

  • Underground mining (soft rock) — refers to a group of underground mining techniques used to extract coal, oil shale and other minerals or geological materials from sedimentary ( soft ) rocks. Because deposits in sedimentary rocks are commonly layered and relatively less hard,… …   Wikipedia

  • Underground mining (hard rock) — A three dimensional model of an underground mine with shaft access Underground hard rock mining refers to various underground mining techniques used to excavate hard minerals, mainly those containing metals[1] such as ore containing gold …   Wikipedia

  • Mining methods of the Klondike Gold Rush — See also: Klondike Gold Rush, Mining Contents 1 During the Klondike Gold Rush (1896 1910) 1.1 Methods of bringing out the gold 1.1.1 Underground mining …   Wikipedia

  • mining — /muy ning/, n. 1. the act, process, or industry of extracting ores, coal, etc., from mines. 2. the laying of explosive mines. [1250 1300; ME: undermining (walls in an attack); see MINE2, ING1] * * * I Excavation of materials from the Earth s… …   Universalium

  • Mining rock mass rating — Laubscher developed the Mining Rock Mass Rating (MRMR)[1][2][3][4][5] system by modifying the Rock Mass Rating (RMR) system of Bieniawsk …   Wikipedia

  • Underground coal gasification — (UCG) is an in situ gasification process carried out in non mined coal seams using injection and production wells drilled from the surface, which enables the coal to be converted into product gas. The process is flexible in operation and is… …   Wikipedia

  • Mining in Zambia — Centres of mining operations include Konkola and Kitwe. Contents 1 Mining in Kitwe 1.1 Mopani Copper Mines 1.2 Konkola Copper Mine 1.3 Rokana Mine …   Wikipedia

  • Mining — This article is about the extraction of geological materials from the Earth. For the municipality in Austria, see Mining, Austria. For the siege tactic, see Mining (military). For name of the Chinese emperor, see Daoguang Emperor. Simplified… …   Wikipedia

  • Mining engineering — Surface coal mine with haul truck in foreground Mining engineering is an engineering discipline that involves the practice, the theory, the science, the technology, and application of extracting and processing minerals from a naturally occurring… …   Wikipedia

  • Mining in the Upper Harz — The headframe of the Emperor William Shaft in Clausthal is one of the oldest surviving winding towers in Germany …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.